Performance
Training zones
2 min read
Zones divide intensity into ranges, from very easy to maximal. They turn watts, pace and heart rate into a common language in which training can be planned and analysed.
Key points
- On the bike trace uses seven power zones as a percentage of your threshold, plus heart rate zones and pace zones for running.
- You can set your zones yourself in the settings. trace then uses your boundaries everywhere.
- trace only calls a session hard when your zones show it.
Power zones
The seven power zones are built on threshold as Hunter Allen and Andrew Coggan described it for training with a power meter. It means the power you can hold for about an hour, and the zones are given as a percentage of it (Sitko et al., 2020).
- Z1 Active recovery, below 55 percent
- Z2 Endurance, 55 to 75 percent
- Z3 Tempo, 76 to 90 percent
- Z4 Threshold, 91 to 105 percent
- Z5 VO₂max, 106 to 120 percent
- Z6 Anaerobic, 121 to 150 percent
- Z7 Neuromuscular, above 150 percent
For the zones trace takes the FTP from your profile as threshold. If you have not entered one, your critical power serves as threshold.
Heart rate and pace
trace divides heart rate zones as a percentage of your maximum heart rate, separately for cycling and running, because heart rate is usually a little higher when running at the same effort. For running there are also pace zones, relative to your threshold pace. Heart rate responds more slowly than power and pace, so for short intervals power or pace zones say more.
Your own zones
If the standard boundaries do not fit you, for example because you know your zones from a lab test, set them yourself in the settings under training zones. trace then uses your boundaries everywhere, in the analysis of your sessions, in the targets of your training plan, when exporting to your watch and in the Coach.
When a session was hard
Whether a session was easy or hard, trace reads from the zones and not from an average. An average over the whole session is easily misleading. Many short surges raise it although most of the time was easy, and long threshold intervals with breaks in between lower it.
trace therefore only calls a ride hard if a section of several minutes was at least in the threshold range. For runs pace decides. If it cannot be shown, for example without a power meter, trace does not claim it. How your time is distributed across the zones over weeks is explained in Intensity distribution.
Next article · 4.2
Critical power and W'
Critical power is the boundary between power you can hold for a long time and power that will exhaust you within a foreseeable time. trace reads it from your best efforts, without you having to do a test.
Related
Sources
- Sitko, S., Cirer-Sastre, R., Corbi, F., & López-Laval, I. (2020). Power assessment in road cycling: A narrative review. Sustainability, 12(12), Article 5216. https://doi.org/10.3390/su12125216